Looking for tooling for your Micro-Fit+ 206460 contacts from Molex.
Molex recommends the following tools for use with this series of contacts.
| Tooling | |
|---|---|
| Extraction Tool for Micro-Fit Terminals | 11030043 |
| FineAdjust Applicator for Micro-Fit+ Crimp Terminals, 20-24 AWG, Insulation OD 0.90-1.10mm | 2037023500 |
| FineAdjust Applicator for Micro-Fit+ Crimp Terminals, 20-24 AWG, Insulation OD 1.11-1.30mm | 2037023600 |
| FineAdjust Applicator for Micro-Fit+ Crimp Terminals, 20-24 AWG, Insulation OD 1.31-1.85mm | 2037023700 |
| Hand Crimp Tool for Micro-Fit Crimp Terminals, 20 AWG, UL1007 and UL1061 Wires | 2133094500 |
| Hand Crimp Tool for Micro-Fit Crimp Terminals, 22 AWG, UL1007 and UL1061 Wires | 2133094600 |
| Hand Crimp Tool for Micro-Fit+ Crimp Terminals, 24 AWG, UL 1007 and UL 1061 Wires | 2133094700 |
| Insertion Tool for Micro-Fit 3.0 and CRC Male and Female Crimp Terminals, 20-30 AWG | 638120800 |
Applicable Part Numbers
| Digi-Key Part Numbers | Manufacturer Part Numbers |
|---|---|
| 900-2064600022TR-ND,900-2064600022CT-ND | 2064600022 |
| 900-2064600012TR-ND,900-2064600012CT-ND | 2064600012 |
| 900-2064600042TR-ND,900-2064600042CT-ND | 2064600042 |
| WM26578TR-ND,WM26578CT-ND | 2064600011 |
| WM26581TR-ND,WM26581CT-ND | 2064600041 |
| WM26579TR-ND,WM26579CT-ND | 2064600021 |
| WM26580TR-ND,WM26580CT-ND | 2064600031 |
| 900-2064600032TR-ND,900-2064600032CT-ND | 2064600032 |
| 2266-206460-0021-ND | 206460-0021 |
| 2266-206460-0041-ND | 206460-0041 |