UART to RS232

[RobertCNelson]

Careful, that link is the 6ul… You are on a 6 plus:

https://www.digi.com/resources/documentation/digidocs/embedded/dey/2.6/cc6plus/bsp_r_uart_cc6cc6qp

Any device tree changes will require a rebuild of the device tree files, but not a full rebuild of everything…

PS, i need to look at the 6+ install scripts, on the 8M i utilized the “run install_linux_fw_sd” script in u-boot to do that…

Yocto: Getting Started with the Digi ConnectCore 8M Nano Development Kit

Introduction Documentation Digi Documentation: Digi Embedded Yocto | ConnectCore 8M Nano Required packages (Debian 10) sudo apt update sudo apt install build-essential chrpath curl diffstat g++-multilib gawk \ gcc-multilib git libsdl1.2-dev minicom socat texinfo unzip wget xterm Install Repo: sudo curl -o /usr/local/bin/repo http://commondatastorage.googleapis.com/git-repo-downloads/repo sudo chmod a+x /usr/local/bin/repo Install Digi’s dey manifest: repo init -u https://github.com/d…

Regards,