BZT52C3V3-E3-08

[dkskbh]

------Question for BZT52C3V3-E3-08 Please Put your question below------

We hope this message finds you well.

During an XRF screening of a diode component supplied by your company, bromine (Br) was detected. Our customer has requested a detailed analysis report, but before proceeding with that, we would like to clarify a few points with you.

Could you please confirm the following regarding the diode in question:

1. Does the component contain any brominated flame retardants (BFRs)?
   (e.g., PBBs, PBDEs, TBBPA, etc.)

2. Is bromine normally expected to be present in this component as part of its design or material composition?

3. Kindly provide the MSDS (Material Safety Data Sheet) for the relevant material(s), so we can verify the content rate and support the analysis.

We would appreciate your prompt response on this matter, as it is required for further reporting to our customer.

If you have any questions or need additional details, feel free to reach out.

Thank you for your cooperation.

[aayushi.nainwal]

Hello @dkskbh
Welcome to the community!

Please note that we typically do not share documents such as MSDS or other chemical-related information directly through this forum.

However, based on the Vishay Material Category Policy, you may find some relevant information in the following document:

-material-category-policy-rev-august-2023.pdf

BZT52 Zener Diodes - Quality | Vishay

For further assistance with your request, we kindly ask you to submit it through our Help and Support Portal: Help and Support | DigiKey

And for more support, you’re welcome to reach out to our Sales team: orders@digikey.com