Find best dimming driver for led

[Verna_1353]

Welcome to the technical Forum. First you need to do research on the circuit you are are designing. You would need to choose what type of dimming you are going to use. There are multiple options . Here is a link to some drivers: LED Drivers | Power Management (PMIC) | Electronic Components Distributor DigiKey

You can use the scroll bar to find the box for dimming options. Here us a post on differences in Dimming types:

LED Driver Dimming Types

Analog Dimming Analog dimming is commonly referred to as “0-10V Dimming”. This dimming type uses a linear potentiometer or a wall slide potentiometer like the Leviton IP710 to control the brightness. In a two wire dimming system configuration, one of the driver dimming wires will have a 10 volt output, and the other wire is the return. The potentiometer will vary voltage between the two wires from 0 volts to 10 volts and typically conducts current in the milliamp range. Common potentiometers fo…

This is where I would start and see what you want for your design