Massey Tractor Denso Blower Switch Connector

Interconnect Rectangular Connectors
, ,
1

I am having trouble tracking down the connector that is somewhat melted in the pictures. I also have picture of the Denso 12V switch that the connector plugs into. If I can get help figuring out what connector I need I can probably find the terminals that I would need from that. The connector is for a blower switch and has 5 female terminals in it. Our dealership has run into this connector melted several times and Massey (Agco Company) only sells the complete harness.

IMG_1079
IMG_1079960×1280 163 KB

IMG_1081
IMG_1081960×1280 86.6 KB

IMG_1082
IMG_1082768×1024 88.7 KB

2

This is the 12v Denso Blower switch that the connector plugs into.

IMG_4919
IMG_4919960×1280 169 KB

IMG_4920
IMG_4920960×1280 165 KB

IMG_4922
IMG_4922960×1280 186 KB

3

Hello,

Thank you for your post.

After looking through our system I did not find an exact match to your housings, but we do have some similar options that house quick connects like those.

Here is a link t the housings that hold the male tabs : Connectors, Interconnects | Terminals - Housings, Boots | DigiKey

Here is a link to the female options : Connectors, Interconnects | Terminals - Housings, Boots | DigiKey

4

OMG, Masseyman, I’ve got the same connector issue on an AGCO tractor. Compressor pin melted. Did you ever find the connector type? What a pain it is to locate.

5

I don’t believe we were able to locate anything fast enough for our customer and he ended up just putting female slide connectors on each pin. If you find a connector that works I would greatly appreciate knowing what you find.