@Lassley, Let’s see if this helps:
GATEWAY_XBEE_S2C:
SH: 13A200
SL: 41563703
Product Family: XCB24C
Function Set: ZIGBEE TH Reg
Firmware version: 4061
Everything default, except for these Configuration Changes (blue triangle's)
ID: PAN ID: 4321
ZS: ZigBee Stack Profile: 0
CE: Coordinator Enable: Enabled [1]
NI: Node Identifier: GATEWAY_XBEE_S2C
KY: Encryption Key: 0
NK: Network Encryption Key: 0
BD: Baud Rate: 115200
ENDDEVICE_XBEE_S2C:
SH: 13A200
SL: 416722E7
Product Family: XCB24C
Function Set: ZIGBEE TH Reg
Firmware version: 4061
Everything default, except for these Configuration Changes (blue triangle's)
ID: PAN ID: 4321
ZS: ZigBee Stack Profile: 0
DH: Destination Address High: 13A200
DL: Destination Address Low: 41563703
NI: Node Identifier: ENDDEVICE_XBEE_S2C
KY: Encryption Key: 0
NK: Network Encryption Key: 0
BD: Baud Rate: 115200
and here’s a video of the serial link.
Regards,