I'm looking for the 3D modeling file of the PYNQ-Z2 board

[jojobabao]

I needed to use a 3D model of the PYNQ-Z2 board for an international artificial intelligence competition. Unfortunately, despite extensive Googling, I couldn’t find a 3D model file for the PYNQ-Z2 board. However, I stumbled upon this site:

DFRobot PYNQ-Z2 Development Board | DigiKey Daily

I stumbled upon a 3D model of the PYNQ-Z2 board used on this site, and I’m contacting DigiKey to see if they could share the 3D model file for this board. I would greatly appreciate your help.

Or, if you have a 3D model file of the PYNQ-Z2 board, please share it with me. I would appreciate your help.

[Steven_14444]

I do not see that there is a 3D model of this board. There is only the outline dimensions available.

From the datasheet: Outline Dimension: 87mm*140mm/3.43”*5.51"