Microsemi SmartFusion®2 M2S010-MKR-KIT Pin-Out Diagrams

[Ryan_2724]

M2S010-MKR-KIT
The quick start guide lists the main user controllable pins:
https://media.digikey.com/pdf/Data%20Sheets/Microsemi%20PDFs/M2S010-MKR-KIT_QSG.pdf

For everything else, the full board schematic is also provided on the eewiki:

Getting Started with the Microsemi SmartFusion 2 Maker-Board

Created by Taylor Roorda, last modified on Jul 17, 2019 Introduction [image] The Microsemi Maker-Board is a low cost evaluation kit featuring the SmartFusion 2 SoC. The SmartFusion 2 combines an ARM Cortex-M3 processor with Microsemi’s flash-based FPGA fabric on a single chip along with many of the peripherals SoC users are accustomed to such as RAM and DSP blocks. The Maker-Board adds on an Ethernet interface, an ambient light sensor, SPI Flash, and some buttons and LEDs. The board also has…

https://forum.digikey.com/uploads/short-url/2WxYDppsgH5ljsnoeX1fSsJl8gZ.pdf