Recommendations on ESP32 module 9and ESP8266 device for M2S010-MKR-KIT

[EEperson]

Hi, I bought this device and looks to be developed by Digi-Key with Microsemi. I reviewed specs and product docs and see pinout for connectors, but there are options for components and someone might say, “pick one,” but is there Digit-Key recommendation for ESP32 chip module and ESP8266 product that connects to this dev kit? Thank you.

[Verna_1353]

Welcome to the Technical Forum. You can review this post that should be able to help :

Getting Started with the Microsemi SmartFusion 2 Maker-Board

Created by Taylor Roorda, last modified on Jul 17, 2019 Introduction [image] The Microsemi Maker-Board is a low cost evaluation kit featuring the SmartFusion 2 SoC. The SmartFusion 2 combines an ARM Cortex-M3 processor with Microsemi’s flash-based FPGA fabric on a single chip along with many of the peripherals SoC users are accustomed to such as RAM and DSP blocks. The Maker-Board adds on an Ethernet interface, an ambient light sensor, SPI Flash, and some buttons and LEDs. The board also has…