I am looking at latch pull solenoid DSML-1153-24C. I have the following questions: Regarding the stroke length of 19.05mm for this solenoid, is that the total length of the stroke or just the part that extends out of the frame? If it is the total length, may I know what the length of the part that…

Hi hipoweredge , After looking at the documentation, and considering that the table lists the maximum stroke length as 0.75 inches, I would interpret the dimensions as follows: Approximate lengths: Energized state = 1.24" + 1.22" + 0.156" = 2.62 inches De-energized state = 1.24" + 1.22" + 0.156" …

Solenoid DSML-1153-24C

Electromechanical Motors, Actuators, Solenoids and Drivers

APDahlen August 16, 2024, 10:09pm 17

Hello @hipoweredge,

Getting closer to writing the article about the solenoid. Today I completed the test platform. I hope to have the article written within the week.

Have a good weekend,

Aaron

Topic		Replies	Views
Delta Solenoid (DSML-1153-24C) Motors, Actuators, Solenoids and Drivers delta-electronics , solenoids	2	15	March 24, 2025
Solenoids Product Selection Guide electromechanical , motors-actuators-solenoids-and-drivers , solenoids	0	544	June 23, 2023
Push/pull electromagnet Solenoid Requirement Motors, Actuators, Solenoids and Drivers cross-reference , electromechanical , part-identification , motors-actuators-solenoids-and-drivers	3	506	August 4, 2023
Solenoids Motors, Actuators, Solenoids and Drivers faqs , electromechanical , motors-actuators-solenoids-and-drivers	0	8397	December 6, 2017
Operation of the Latching Solenoid Education electromechanical , motors-actuators-solenoids-and-drivers , engineering-briefs	0	487	August 21, 2024

Solenoid DSML-1153-24C

Related topics