Trying to identify connector needed for ribbon cable neato D7

[Jeff_2258]

Hello @jtst,

Could you measure the pitch or the overall width of the ribbon cable? For information on how to measure, please see this post-

Measuring Pitch on Flat Flex Ribbon jumper cables

Here is a little information on looking at the Flat Flex cable jumpers and figuring the Pitch of the Cable. Digi-key does carry the Flat Flex cable jumpers. Here are the Jumper cable options. If you are looking to replace a cable or find one to fit a FFC/FPC connector the Pitch requirement will be important. The Pitch will be the center to center spacing of the conductors on the cable. [image] The formula used is Cable Width = (# of conductors + 1)(Pitch) The + 1 is referring to the ends…

To see the options we have in our system, please go to this link: Flat Flex Ribbon Jumpers, Cables | Electronic Components Distributor DigiKey

Thank you!

-Jeff