If you are looking for the XAL5030 Series of high current shielded power inductors the manufacturer recommends the following alternative options.
For XAL5030, see XGL4030 for space savings with 40% less board area. Improved efficiency due to low DCR (up to 25% lower) and higher L values (up to 12 uH). Also see XGL5030 for significantly lower DCR (up to 40% lower) and higher L values (up to 18 uH).-Coilcraft
| Inductance (µH) | XAL5030 Series (Not Available) | XGL4030 Series (*Available) |
|---|---|---|
| XAL5030/XGL4030 | Datasheet | Datasheet |
| 0.16µH/0.13µH | XAL5030-161ME_ | XGL4030-131MEC |
| 0.33µH/0.30µH | XAL5030-331ME_ | XGL4030-301MEC |
| 0.60µH/0.62µH | XAL5030-601ME_ | XGL4030-621MEC |
| 0.80µH/0.76µH | XAL5030-801ME_ | XGL4030-761MEC |
| 1.0µH/1.0µH | XAL5030-102ME_ | XGL4030-102MEC |
| 1.2µH/1.2µH | XAL5030-122ME_ | XGL4030-122MEC |
| 2.2µH/2.2µH | XAL5030-222ME_ | XGL4030-222MEC |
| 3.3µH/3.3µH | XAL5030-332ME_ | XGL4030-332MEC |
| 4.7µH/4.7µH | XAL5030-472ME_ | XGL4030-472MEC |
| Inductance (µH) | XAL5030 Series (Not Available) | XGL5030 Series (Available) |
| XAL5030/XGL5030 | Datasheet | Datasheet |
| 0.16µH/0.18µH | XAL5030-161ME_ | XGL5030-181MEC |
| 0.33µH/0.35µH | XAL5030-331ME_ | XGL5030-351MEC |
| 0.60µH/0.60µH | XAL5030-601ME_ | XGL5030-601MEC |
| 0.80µH/0.82µH | XAL5030-801ME_ | XGL5030-821MEC |
| 1.0µH/1.0µH | XAL5030-102ME_ | XGL5030-102MEC |
| 1.2µH/1.2µH | XAL5030-122ME_ | XGL5030-122MEC |
| 2.2µH/2.2µH | XAL5030-222ME_ | XGL5030-222MEC |
| 3.3µH/3.3µH | XAL5030-332ME_ | XGL5030-332MEC |
| 4.7µH/4.7µH | XAL5030-472ME_ | XGL5030-472MEC |
Example Part Number:
XGL4030-222MEC
Series:
XGL4030
Inductance:
Three digit induction code. The first two are significant. The last one is the multiplication factor (the number of zeroes).
Example:
2.2µH = 2200nH = 22 significant with two zeroes = 222.
Termination:
E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:
C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel
available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
Market Place Products
While these products are available through Digi-Key, please note that they are considered Market Place Products and this may impact quantities available, lead times, and other factors.
For More information on Market Place Products Please click here:
Digi-Key Marketplace | Digikey Electronics
Digi-Key Marketplace is your access to millions of new products and services from new suppliers all on one website. Learn more at Digi-Key today!
Note: All quotations above are taken from the information provided by the supplier in the data sheet they provided.
XAL5030 Series Part Numbers
| E = Halogen free component. RoHS compliant tin-silver over copper terminations. | T = RoHS tin-silver-copper (95.5/4/0.5) | S = non-RoHS tin-lead (63/37). |
|---|---|---|
| XAL5030-161MEC | XAL5030-161MTC | XAL5030-161MSC |
| XAL5030-331MEC | XAL5030-331MTC | XAL5030-331MSC |
| XAL5030-601MEC | XAL5030-601MTC | XAL5030-601MSC |
| XAL5030-801MEC | XAL5030-801MTC | XAL5030-801MSC |
| XAL5030-102MEC | XAL5030-102MTC | XAL5030-102MSC |
| XAL5030-122MEC | XAL5030-122MTC | XAL5030-122MSC |
| XAL5030-222MEC | XAL5030-222MTC | XAL5030-222MSC |
| XAL5030-332MEC | XAL5030-332MTC | XAL5030-332MSC |
| XAL5030-472MEC | XAL5030-472MTC | XAL5030-472MSC |
| XAL5030-161MEB | XAL5030-161MTB | XAL5030-161MSB |
| XAL5030-331MEB | XAL5030-331MTB | XAL5030-331MSB |
| XAL5030-601MEB | XAL5030-601MTB | XAL5030-601MSB |
| XAL5030-801MEB | XAL5030-801MTB | XAL5030-801MSB |
| XAL5030-102MEB | XAL5030-102MTB | XAL5030-102MSB |
| XAL5030-122MEB | XAL5030-122MTB | XAL5030-122MSB |
| XAL5030-222MEB | XAL5030-222MTB | XAL5030-222MSB |
| XAL5030-332MEB | XAL5030-332MTB | XAL5030-332MSB |
| XAL5030-472MEB | XAL5030-472MTB | XAL5030-472MSB |
| XAL5030-161MED | XAL5030-161MTD | XAL5030-161MSD |
| XAL5030-331MED | XAL5030-331MTD | XAL5030-331MSD |
| XAL5030-601MED | XAL5030-601MTD | XAL5030-601MSD |
| XAL5030-801MED | XAL5030-801MTD | XAL5030-801MSD |
| XAL5030-102MED | XAL5030-102MTD | XAL5030-102MSD |
| XAL5030-122MED | XAL5030-122MTD | XAL5030-122MSD |
| XAL5030-222MED | XAL5030-222MTD | XAL5030-222MSD |
| XAL5030-332MED | XAL5030-332MTD | XAL5030-332MSD |
| XAL5030-472MED | XAL5030-472MTD | XAL5030-472MSD |
XGL4030 Series Part Numbers
| E = Halogen free component. RoHS compliant tin-silver over copper terminations. | T = RoHS tin-silver-copper (95.5/4/0.5) | S = non-RoHS tin-lead (63/37). |
|---|---|---|
| XGL4030-301MEC | XGL4030-301MTC | XGL4030-301MSC |
| XGL4030-401MEC | XGL4030-401MTC | XGL4030-401MSC |
| XGL4030-471MEC | XGL4030-471MTC | XGL4030-471MSC |
| XGL4030-621MEC | XGL4030-621MTC | XGL4030-621MSC |
| XGL4030-761MEC | XGL4030-761MTC | XGL4030-761MSC |
| XGL4030-102MEC | XGL4030-102MTC | XGL4030-102MSC |
| XGL4030-122MEC | XGL4030-122MTC | XGL4030-122MSC |
| XGL4030-152MEC | XGL4030-152MTC | XGL4030-152MSC |
| XGL4030-222MEC | XGL4030-222MTC | XGL4030-222MSC |
| XGL4030-332MEC | XGL4030-332MTC | XGL4030-332MSC |
| XGL4030-472MEC | XGL4030-472MTC | XGL4030-472MSC |
| XGL4030-562MEC | XGL4030-562MTC | XGL4030-562MSC |
| XGL4030-682MEC | XGL4030-682MTC | XGL4030-682MSC |
| XGL4030-822MEC | XGL4030-822MTC | XGL4030-822MSC |
| XGL4030-103MEC | XGL4030-103MTC | XGL4030-103MSC |
| XGL4030-123MEC | XGL4030-123MTC | XGL4030-123MSC |
| XGL4030-301MED | XGL4030-301MTD | XGL4030-301MSD |
| XGL4030-401MED | XGL4030-401MTD | XGL4030-401MSD |
| XGL4030-471MED | XGL4030-471MTD | XGL4030-471MSD |
| XGL4030-621MED | XGL4030-621MTD | XGL4030-621MSD |
| XGL4030-761MED | XGL4030-761MTD | XGL4030-761MSD |
| XGL4030-102MED | XGL4030-102MTD | XGL4030-102MSD |
| XGL4030-122MED | XGL4030-122MTD | XGL4030-122MSD |
| XGL4030-152MED | XGL4030-152MTD | XGL4030-152MSD |
| XGL4030-222MED | XGL4030-222MTD | XGL4030-222MSD |
| XGL4030-332MED | XGL4030-332MTD | XGL4030-332MSD |
| XGL4030-472MED | XGL4030-472MTD | XGL4030-472MSD |
| XGL4030-562MED | XGL4030-562MTD | XGL4030-562MSD |
| XGL4030-682MED | XGL4030-682MTD | XGL4030-682MSD |
| XGL4030-822MED | XGL4030-822MTD | XGL4030-822MSD |
| XGL4030-103MED | XGL4030-103MTD | XGL4030-103MSD |
| XGL4030-123MED | XGL4030-123MTD | XGL4030-123MSD |
XGL5030 Series Part Numbers
| E = Halogen free component. RoHS compliant tin-silver over copper terminations. | T = RoHS tin-silver-copper (95.5/4/0.5) | S = non-RoHS tin-lead (63/37). |
|---|---|---|
| XGL5030-401MEC | XGL5030-401MTC | XGL5030-401MSC |
| XGL5030-521MEC | XGL5030-521MTC | XGL5030-521MSC |
| XGL5030-601MEC | XGL5030-601MTC | XGL5030-601MSC |
| XGL5030-651MEC | XGL5030-651MTC | XGL5030-651MSC |
| XGL5030-821MEC | XGL5030-821MTC | XGL5030-821MSC |
| XGL5030-901MEC | XGL5030-901MTC | XGL5030-901MSC |
| XGL5030-102MEC | XGL5030-102MTC | XGL5030-102MSC |
| XGL5030-122MEC | XGL5030-122MTC | XGL5030-122MSC |
| XGL5030-152MEC | XGL5030-152MTC | XGL5030-152MSC |
| XGL5030-182MEC | XGL5030-182MTC | XGL5030-182MSC |
| XGL5030-222MEC | XGL5030-222MTC | XGL5030-222MSC |
| XGL5030-332MEC | XGL5030-332MTC | XGL5030-332MSC |
| XGL5030-472MEC | XGL5030-472MTC | XGL5030-472MSC |
| XGL5030-562MEC | XGL5030-562MTC | XGL5030-562MSC |
| XGL5030-682MEC | XGL5030-682MTC | XGL5030-682MSC |
| XGL5030-822MEC | XGL5030-822MTC | XGL5030-822MSC |
| XGL5030-103MEC | XGL5030-103MTC | XGL5030-103MSC |
| XGL5030-123MEC | XGL5030-123MTC | XGL5030-123MSC |
| XGL5030-153MEC | XGL5030-153MTC | XGL5030-153MSC |
| XGL5030-183MEC | XGL5030-183MTC | XGL5030-183MSC |
| XGL5030-223MEC | XGL5030-223MTC | XGL5030-223MSC |
| XGL5030-401MED | XGL5030-401MTD | XGL5030-401MSD |
| XGL5030-521MED | XGL5030-521MTD | XGL5030-521MSD |
| XGL5030-601MED | XGL5030-601MTD | XGL5030-601MSD |
| XGL5030-651MED | XGL5030-651MTD | XGL5030-651MSD |
| XGL5030-821MED | XGL5030-821MTD | XGL5030-821MSD |
| XGL5030-901MED | XGL5030-901MTD | XGL5030-901MSD |
| XGL5030-102MED | XGL5030-102MTD | XGL5030-102MSD |
| XGL5030-122MED | XGL5030-122MTD | XGL5030-122MSD |
| XGL5030-152MED | XGL5030-152MTD | XGL5030-152MSD |
| XGL5030-182MED | XGL5030-182MTD | XGL5030-182MSD |
| XGL5030-222MED | XGL5030-222MTD | XGL5030-222MSD |
| XGL5030-332MED | XGL5030-332MTD | XGL5030-332MSD |
| XGL5030-472MED | XGL5030-472MTD | XGL5030-472MSD |
| XGL5030-562MED | XGL5030-562MTD | XGL5030-562MSD |
| XGL5030-682MED | XGL5030-682MTD | XGL5030-682MSD |
| XGL5030-822MED | XGL5030-822MTD | XGL5030-822MSD |
| XGL5030-103MED | XGL5030-103MTD | XGL5030-103MSD |
| XGL5030-123MED | XGL5030-123MTD | XGL5030-123MSD |
| XGL5030-153MED | XGL5030-153MTD | XGL5030-153MSD |
| XGL5030-183MED | XGL5030-183MTD | XGL5030-183MSD |
| XGL5030-223MED | XGL5030-223MTD | XGL5030-223MSD |
Please review the datasheet to ensure the alternative will work for your application.