Coilcraft XEL4030 Series Supplier Recommended Alternatives

If you are looking for the Coilcraft XEL4030 series of ultra-low loss shielded power inductors the manufacturer recommends the following alternative options.

See XGL4030 for significantly lower DCR (up to 35% lower) and higher L values (up to 12 uH)-Coilcraft

Inductance (µH) XEL4030 Series (Not Available) XGL4030 Series (*Available)
XEL4030/XGL4030 Datasheet Datasheet
0.20µH/0.27µH XEL4030-201ME_ XGL4030-271MEC
0.30µH/0.30µH XEL4030-301ME_ XGL4030-301MEC
0.47µH/0.47µH XEL4030-471ME_ XGL4030-471MEC
0.64µH/0.62µH XEL4030-641ME_ XGL4030-621MEC
0.90µH/µH XEL4030-901ME_ N/A
1.0µH/1.0µH XEL4030-102ME_ XGL4030-102MEC
1.2µH/1.2µH XEL4030-122ME_ XGL4030-122MEC
1.5µH/1.5µH XEL4030-152ME_ XGL4030-152MEC
2.2µH/2.2µH XEL4030-222ME_ XGL4030-222MEC
3.3µH/3.3µH XEL4030-332ME_ XGL4030-332MEC
4.7µH/4.7µH XEL4030-472ME_ XGL4030-472MEC
6.8µH/6.8µH XEL4030-682ME_ XGL4030-682MEC

Example Part Number:





Three digit induction code. The first two are significant. The last one is the multiplication factor (the number of zeroes).
6.8µH = 6800nH = 68 significant with two zeroes = 682


E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).


C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked

Market Place Products

While these products are available through Digi-Key, please note that they are considered Market Place Products and this may impact quantities available, lead times, and other factors.

For More information on Market Place Products Please click here:

Digi-Key Marketplace | Digikey Electronics

Digi-Key Marketplace is your access to millions of new products and services from new suppliers all on one website. Learn more at Digi-Key today!

Note: All quotations above are taken from the information provided by the supplier in the data sheet they provided.

The TechForum Cross Reference category is for parts that Digi-Key does not sell or parts that have gone obsolete. Our Engineers and Techs have reviewed the specifications for these parts and made a recommendation for a replacement. Please review the suggested part to ensure it will work for your application.