If you’re looking for the Coilcraft XFL4030 series of ultra-low DCR shielded power inductors the manufacturer recommends the following alternative options.
See XGL3530 for space saving with 33% less board area and a wider range of L values (from 0.10 to 6.8 µH).
See XGL4030 for significantly higher saturation current and a wider range of L values (from 0.13 to 12 µH).-Coilcraft
Inductance (µH) | XFL4030 Series (Not Available) | XGL3530 Series (*Available) |
---|---|---|
XFL4030/XGL3530 | Datasheet | Datasheet |
0.47µH/0.45µH | XFL4030-471ME_ | XGL3530-451MEC |
1.0µH/1.0µH | XFL4030-102ME_ | XGL3530-102MEC |
2.0µH/2.2µH | XFL4030-202ME_ | XGL3530-222MEC |
3.0µH/3.3µH | XFL4030-302ME_ | XGL3530-332MEC |
4.7µH/4.7µH | XFL4030-472ME_ | XGL3530-472MEC |
Inductance (µH) | XFL4030 Series (Not Available) | XGL4030 Series (*Available) |
---|---|---|
XFL4030/XGL4030 | Datasheet | Datasheet |
0.47µH/0.47µH | XFL4030-471ME_ | XGL4030-471MEC |
1.0µH/1.0µH | XFL4030-102ME_ | XGL4030-102MEC |
2.0µH/2.2µH | XFL4030-202ME_ | XGL4030-222MEC |
3.0µH/3.3µH | XFL4030-302ME_ | XGL4030-332MEC |
4.7µH/4.7µH | XFL4030-472ME_ | XGL4030-472MEC |
Example Part Number
XGL4030-472MEC
Series:
XGL4030
Inductance:
Three digit induction code. The first two are significant. The last one is the multiplication factor (the number of zeroes).
Example:
4.7µH = 4700nH = 47 significant with two zeroes = 472
Termination:
E = RoHS compliant tin-silver over copper.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
S = non-RoHS tin-lead (63/37).
Packaging:
C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
Market Place Products
While these products are available through Digi-Key, please note that they are considered Market Place Products and this may impact quantities available, lead times, and other factors.
For More information on Market Place Products Please click here:
Digi-Key Marketplace | Digikey Electronics
Digi-Key Marketplace is your access to millions of new products and services from new suppliers all on one website. Learn more at Digi-Key today!
XFL4030 Series Part Numbers
E = Halogen free component. RoHS compliant tin-silver over copper | T = RoHS tin-silver-copper (95.5/4/0.5). | S = non-RoHS tin-lead (63/37). |
---|---|---|
XFL4030-471MEC | XFL4030-471MEC | XFL4030-471MEC |
XFL4030-102MEC | XFL4030-102MEC | XFL4030-102MEC |
XFL4030-202MEC | XFL4030-202MEC | XFL4030-202MEC |
XFL4030-302MEC | XFL4030-302MEC | XFL4030-302MEC |
XFL4030-472MEC | XFL4030-472MEC | XFL4030-472MEC |
XFL4030-471MEB | XFL4030-471MEB | XFL4030-471MEB |
XFL4030-102MEB | XFL4030-102MEB | XFL4030-102MEB |
XFL4030-202MEB | XFL4030-202MEB | XFL4030-202MEB |
XFL4030-302MEB | XFL4030-302MEB | XFL4030-302MEB |
XFL4030-472MEB | XFL4030-472MEB | XFL4030-472MEB |
XFL4030-471MED | XFL4030-471MED | XFL4030-471MED |
XFL4030-102MED | XFL4030-102MED | XFL4030-102MED |
XFL4030-202MED | XFL4030-202MED | XFL4030-202MED |
XFL4030-302MED | XFL4030-302MED | XFL4030-302MED |
XFL4030-472MED | XFL4030-472MED | XFL4030-472MED |
XGL3530 Series Part Numbers
E = Halogen free component. RoHS compliant tin-silver over copper | T = RoHS tin-silver-copper (95.5/4/0.5). | S = non-RoHS tin-lead (63/37). |
---|---|---|
XGL3530-101MEC | XGL3530-101MTC | XGL3530-101MSC |
XGL3530-201MEC | XGL3530-201MTC | XGL3530-201MSC |
XGL3530-331MEC | XGL3530-331MTC | XGL3530-331MSC |
XGL3530-451MEC | XGL3530-451MTC | XGL3530-451MSC |
XGL3530-601MEC | XGL3530-601MTC | XGL3530-601MSC |
XGL3530-701MEC | XGL3530-701MTC | XGL3530-701MSC |
XGL3530-821MEC | XGL3530-821MTC | XGL3530-821MSC |
XGL3530-102MEC | XGL3530-102MTC | XGL3530-102MSC |
XGL3530-122MEC | XGL3530-122MTC | XGL3530-122MSC |
XGL3530-152MEC | XGL3530-152MTC | XGL3530-152MSC |
XGL3530-222MEC | XGL3530-222MTC | XGL3530-222MSC |
XGL3530-332MEC | XGL3530-332MTC | XGL3530-332MSC |
XGL3530-472MEC | XGL3530-472MTC | XGL3530-472MSC |
XGL3530-562MEC | XGL3530-562MTC | XGL3530-562MSC |
XGL3530-682MEC | XGL3530-682MTC | XGL3530-682MSC |
XGL3530-101MED | XGL3530-101MTD | XGL3530-101MSD |
XGL3530-201MED | XGL3530-201MTD | XGL3530-201MSD |
XGL3530-331MED | XGL3530-331MTD | XGL3530-331MSD |
XGL3530-451MED | XGL3530-451MTD | XGL3530-451MSD |
XGL3530-601MED | XGL3530-601MTD | XGL3530-601MSD |
XGL3530-701MED | XGL3530-701MTD | XGL3530-701MSD |
XGL3530-821MED | XGL3530-821MTD | XGL3530-821MSD |
XGL3530-102MED | XGL3530-102MTD | XGL3530-102MSD |
XGL3530-122MED | XGL3530-122MTD | XGL3530-122MSD |
XGL3530-152MED | XGL3530-152MTD | XGL3530-152MSD |
XGL3530-222MED | XGL3530-222MTD | XGL3530-222MSD |
XGL3530-332MED | XGL3530-332MTD | XGL3530-332MSD |
XGL3530-472MED | XGL3530-472MTD | XGL3530-472MSD |
XGL3530-562MED | XGL3530-562MTD | XGL3530-562MSD |
XGL3530-682MED | XGL3530-682MTD | XGL3530-682MSD |
XGL4030 Series Part Numbers
E = Halogen free component. RoHS compliant tin-silver over copper | T = RoHS tin-silver-copper (95.5/4/0.5). | S = non-RoHS tin-lead (63/37). |
---|---|---|
XGL4030-131MEC | XGL4030-131MTC | XGL4030-131MSC |
XGL4030-271MEC | XGL4030-271MTC | XGL4030-271MSC |
XGL4030-301MEC | XGL4030-301MTC | XGL4030-301MSC |
XGL4030-401MEC | XGL4030-401MTC | XGL4030-401MSC |
XGL4030-471MEC | XGL4030-471MTC | XGL4030-471MSC |
XGL4030-621MEC | XGL4030-621MTC | XGL4030-621MSC |
XGL4030-761MEC | XGL4030-761MTC | XGL4030-761MSC |
XGL4030-102MEC | XGL4030-102MTC | XGL4030-102MSC |
XGL4030-122MEC | XGL4030-122MTC | XGL4030-122MSC |
XGL4030-152MEC | XGL4030-152MTC | XGL4030-152MSC |
XGL4030-222MEC | XGL4030-222MTC | XGL4030-222MSC |
XGL4030-332MEC | XGL4030-332MTC | XGL4030-332MSC |
XGL4030-472MEC | XGL4030-472MTC | XGL4030-472MSC |
XGL4030-562MEC | XGL4030-562MTC | XGL4030-562MSC |
XGL4030-682MEC | XGL4030-682MTC | XGL4030-682MSC |
XGL4030-822MEC | XGL4030-822MTC | XGL4030-822MSC |
XGL4030-103MEC | XGL4030-103MTC | XGL4030-103MSC |
XGL4030-123MEC | XGL4030-123MTC | XGL4030-123MSC |
XGL4030-131MED | XGL4030-131MTD | XGL4030-131MSD |
XGL4030-271MED | XGL4030-271MTD | XGL4030-271MSD |
XGL4030-301MED | XGL4030-301MTD | XGL4030-301MSD |
XGL4030-401MED | XGL4030-401MTD | XGL4030-401MSD |
XGL4030-471MED | XGL4030-471MTD | XGL4030-471MSD |
XGL4030-621MED | XGL4030-621MTD | XGL4030-621MSD |
XGL4030-761MED | XGL4030-761MTD | XGL4030-761MSD |
XGL4030-102MED | XGL4030-102MTD | XGL4030-102MSD |
XGL4030-122MED | XGL4030-122MTD | XGL4030-122MSD |
XGL4030-152MED | XGL4030-152MTD | XGL4030-152MSD |
XGL4030-222MED | XGL4030-222MTD | XGL4030-222MSD |
XGL4030-332MED | XGL4030-332MTD | XGL4030-332MSD |
XGL4030-472MED | XGL4030-472MTD | XGL4030-472MSD |
XGL4030-562MED | XGL4030-562MTD | XGL4030-562MSD |
XGL4030-682MED | XGL4030-682MTD | XGL4030-682MSD |
XGL4030-822MED | XGL4030-822MTD | XGL4030-822MSD |
XGL4030-103MED | XGL4030-103MTD | XGL4030-103MSD |
XGL4030-123MED | XGL4030-123MTD | XGL4030-123MSD |
Note: All quotations above are taken from the information provided by the supplier in the data sheet they provided.
The TechForum Cross Reference category is for parts that Digi-Key does not sell or parts that have gone obsolete. Our Engineers and Techs have reviewed the specifications for these parts and made a recommendation for a replacement. Please review the suggested part to ensure it will work for your application.