If you are looking for the XAL6030 Series of high current shielded power inductors the manufacturer recommends the following alternative options.
For XAL6030, see XGL5030 for space savings with 30% less board area. Improved efficiency due to low DCR (up to 10% lower) and higher L values (up to 18 µH). Also see XGL6030 for significantly lower DCR (up to 30% lower) and higher L values (up to 18 µH)-Coilcraft
| Inductance (µH) | XAL6030 Series (Not Available) | XGL5030 Series (*Available) |
|---|---|---|
| XAL6030/XGL5030 | Datasheet | Datasheet |
| 0.18µH/0.18µH | XAL6030-181ME_ | XGL5030-181MEC |
| 0.33µH/0.35µH | XAL6030-331ME_ | XGL5030-351MEC |
| 0.56µH/0.52µH | XAL6030-561ME_ | XGL5030-521MEC |
| 1.0µH/1.0µH | XAL6030-102ME_ | XGL5030-102MEC |
| 1.2µH/1.2µH | XAL6030-122ME_ | XGL5030-122MEC |
| 1.8µH/1.8µH | XAL6030-182ME_ | XGL5030-182MEC |
| 2.2µH/2.2µH | XAL6030-222ME_ | XGL5030-222MEC |
| 3.3µH/3.3µH | XAL6030-332ME_ | XGL5030-332MEC |
| Inductance (µH) | XAL6030 Series (Not Available) | XGL6030 Series (Available) |
| XAL6030/XGL6030 | Datasheet | Datasheet |
| 0.18µH/0.18µH | XAL6030-181ME_ | XGL6030-181MEC |
| 0.33µH/0.38µH | XAL6030-331ME_ | XGL6030-381MEC |
| 0.56µH/0.47µH | XAL6030-561ME_ | XGL6030-471MEC |
| 1.0µH/1.0µH | XAL6030-102ME_ | XGL6030-102MEC |
| 1.2µH/1.2µH | XAL6030-122ME_ | XGL6030-122MEC |
| 1.8µH/1.8µH | XAL6030-182ME_ | XGL6030-182MEC |
| 2.2µH/2.2µH | XAL6030-222ME_ | XGL6030-222MEC |
| 3.3µH/3.3µH | XAL6030-332ME_ | XGL6030-332MEC |
Example Part Number:
XGL6030-222MEC
Series:
XGL6030
Inductance:
Three digit induction code. The first two are significant. The last one is the multiplication factor (the number of zeroes).
Example:
2.2µH = 2200nH = 22 significant with two zeroes = 222.
Termination:
E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging:
C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel
available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
Market Place Products
While these products are available through Digi-Key, please note that they are considered Market Place Products and this may impact quantities available, lead times, and other factors.
For More information on Market Place Products Please click here:
Digi-Key Marketplace | Digikey Electronics
Digi-Key Marketplace is your access to millions of new products and services from new suppliers all on one website. Learn more at Digi-Key today!
XAL6030 Series Part Numbers
| E = Halogen free component. RoHS compliant tin-silver over copper terminations. | T = RoHS tin-silver-copper (95.5/4/0.5). | S = non-RoHS tin-lead (63/37). |
|---|---|---|
| XAL6030-181MEC | XAL6030-181MTC | XAL6030-181MSC |
| XAL6030-331MEC | XAL6030-331MTC | XAL6030-331MSC |
| XAL6030-561MEC | XAL6030-561MTC | XAL6030-561MSC |
| XAL6030-102MEC | XAL6030-102MTC | XAL6030-102MSC |
| XAL6030-122MEC | XAL6030-122MTC | XAL6030-122MSC |
| XAL6030-182MEC | XAL6030-182MTC | XAL6030-182MSC |
| XAL6030-222MEC | XAL6030-222MTC | XAL6030-222MSC |
| XAL6030-332MEC | XAL6030-332MTC | XAL6030-332MSC |
| XAL6030-181MEB | XAL6030-181MTB | XAL6030-181MSB |
| XAL6030-331MEB | XAL6030-331MTB | XAL6030-331MSB |
| XAL6030-561MEB | XAL6030-561MTB | XAL6030-561MSB |
| XAL6030-102MEB | XAL6030-102MTB | XAL6030-102MSB |
| XAL6030-122MEB | XAL6030-122MTB | XAL6030-122MSB |
| XAL6030-182MEB | XAL6030-182MTB | XAL6030-182MSB |
| XAL6030-222MEB | XAL6030-222MTB | XAL6030-222MSB |
| XAL6030-332MEB | XAL6030-332MTB | XAL6030-332MSB |
| XAL6030-181MED | XAL6030-181MTD | XAL6030-181MSD |
| XAL6030-331MED | XAL6030-331MTD | XAL6030-331MSD |
| XAL6030-561MED | XAL6030-561MTD | XAL6030-561MSD |
| XAL6030-102MED | XAL6030-102MTD | XAL6030-102MSD |
| XAL6030-122MED | XAL6030-122MTD | XAL6030-122MSD |
| XAL6030-182MED | XAL6030-182MTD | XAL6030-182MSD |
| XAL6030-222MED | XAL6030-222MTD | XAL6030-222MSD |
| XAL6030-332MED | XAL6030-332MTD | XAL6030-332MSD |
XGL5030 Series Part Numbers
| E = Halogen free component. RoHS compliant tin-silver over copper terminations. | T = RoHS tin-silver-copper (95.5/4/0.5). | S = non-RoHS tin-lead (63/37). |
|---|---|---|
| XGL5030-181MEC | XGL5030-181MTC | XGL5030-181MSC |
| XGL5030-351MEC | XGL5030-351MTC | XGL5030-351MSC |
| XGL5030-401MEC | XGL5030-401MTC | XGL5030-401MSC |
| XGL5030-521MEC | XGL5030-521MTC | XGL5030-521MSC |
| XGL5030-601MEC | XGL5030-601MTC | XGL5030-601MSC |
| XGL5030-651MEC | XGL5030-651MTC | XGL5030-651MSC |
| XGL5030-821MEC | XGL5030-821MTC | XGL5030-821MSC |
| XGL5030-901MEC | XGL5030-901MTC | XGL5030-901MSC |
| XGL5030-102MEC | XGL5030-102MTC | XGL5030-102MSC |
| XGL5030-122MEC | XGL5030-122MTC | XGL5030-122MSC |
| XGL5030-152MEC | XGL5030-152MTC | XGL5030-152MSC |
| XGL5030-182MEC | XGL5030-182MTC | XGL5030-182MSC |
| XGL5030-222MEC | XGL5030-222MTC | XGL5030-222MSC |
| XGL5030-332MEC | XGL5030-332MTC | XGL5030-332MSC |
| XGL5030-472MEC | XGL5030-472MTC | XGL5030-472MSC |
| XGL5030-562MEC | XGL5030-562MTC | XGL5030-562MSC |
| XGL5030-682MEC | XGL5030-682MTC | XGL5030-682MSC |
| XGL5030-822MEC | XGL5030-822MTC | XGL5030-822MSC |
| XGL5030-103MEC | XGL5030-103MTC | XGL5030-103MSC |
| XGL5030-123MEC | XGL5030-123MTC | XGL5030-123MSC |
| XGL5030-153MEC | XGL5030-153MTC | XGL5030-153MSC |
| XGL5030-183MEC | XGL5030-183MTC | XGL5030-183MSC |
| XGL5030-223MEC | XGL5030-223MTC | XGL5030-223MSC |
| XGL5030-181MED | XGL5030-181MTD | XGL5030-181MSD |
| XGL5030-351MED | XGL5030-351MTD | XGL5030-351MSD |
| XGL5030-401MED | XGL5030-401MTD | XGL5030-401MSD |
| XGL5030-521MED | XGL5030-521MTD | XGL5030-521MSD |
| XGL5030-601MED | XGL5030-601MTD | XGL5030-601MSD |
| XGL5030-651MED | XGL5030-651MTD | XGL5030-651MSD |
| XGL5030-821MED | XGL5030-821MTD | XGL5030-821MSD |
| XGL5030-901MED | XGL5030-901MTD | XGL5030-901MSD |
| XGL5030-102MED | XGL5030-102MTD | XGL5030-102MSD |
| XGL5030-122MED | XGL5030-122MTD | XGL5030-122MSD |
| XGL5030-152MED | XGL5030-152MTD | XGL5030-152MSD |
| XGL5030-182MED | XGL5030-182MTD | XGL5030-182MSD |
| XGL5030-222MED | XGL5030-222MTD | XGL5030-222MSD |
| XGL5030-332MED | XGL5030-332MTD | XGL5030-332MSD |
| XGL5030-472MED | XGL5030-472MTD | XGL5030-472MSD |
| XGL5030-562MED | XGL5030-562MTD | XGL5030-562MSD |
| XGL5030-682MED | XGL5030-682MTD | XGL5030-682MSD |
| XGL5030-822MED | XGL5030-822MTD | XGL5030-822MSD |
| XGL5030-103MED | XGL5030-103MTD | XGL5030-103MSD |
| XGL5030-123MED | XGL5030-123MTD | XGL5030-123MSD |
| XGL5030-153MED | XGL5030-153MTD | XGL5030-153MSD |
| XGL5030-183MED | XGL5030-183MTD | XGL5030-183MSD |
| XGL5030-223MED | XGL5030-223MTD | XGL5030-223MSD |
XGL6030 Series Part Numbers
| E = Halogen free component. RoHS compliant tin-silver over copper terminations. | T = RoHS tin-silver-copper (95.5/4/0.5). | S = non-RoHS tin-lead (63/37). |
|---|---|---|
| XGL6030-181MEC | XGL6030-181MTC | XGL6030-181MSC |
| XGL6030-221MEC | XGL6030-221MTC | XGL6030-221MSC |
| XGL6030-381MEC | XGL6030-381MTC | XGL6030-381MSC |
| XGL6030-471MEC | XGL6030-471MTC | XGL6030-471MSC |
| XGL6030-681MEC | XGL6030-681MTC | XGL6030-681MSC |
| XGL6030-821MEC | XGL6030-821MTC | XGL6030-821MSC |
| XGL6030-102MEC | XGL6030-102MTC | XGL6030-102MSC |
| XGL6030-122MEC | XGL6030-122MTC | XGL6030-122MSC |
| XGL6030-152MEC | XGL6030-152MTC | XGL6030-152MSC |
| XGL6030-182MEC | XGL6030-182MTC | XGL6030-182MSC |
| XGL6030-222MEC | XGL6030-222MTC | XGL6030-222MSC |
| XGL6030-332MEC | XGL6030-332MTC | XGL6030-332MSC |
| XGL6030-472MEC | XGL6030-472MTC | XGL6030-472MSC |
| XGL6030-562MEC | XGL6030-562MTC | XGL6030-562MSC |
| XGL6030-682MEC | XGL6030-682MTC | XGL6030-682MSC |
| XGL6030-822MEC | XGL6030-822MTC | XGL6030-822MSC |
| XGL6030-103MEC | XGL6030-103MTC | XGL6030-103MSC |
| XGL6030-123MEC | XGL6030-123MTC | XGL6030-123MSC |
| XGL6030-153MEC | XGL6030-153MTC | XGL6030-153MSC |
| XGL6030-183MEC | XGL6030-183MTC | XGL6030-183MSC |
| XGL6030-181MED | XGL6030-181MTD | XGL6030-181MSD |
| XGL6030-221MED | XGL6030-221MTD | XGL6030-221MSD |
| XGL6030-381MED | XGL6030-381MTD | XGL6030-381MSD |
| XGL6030-471MED | XGL6030-471MTD | XGL6030-471MSD |
| XGL6030-681MED | XGL6030-681MTD | XGL6030-681MSD |
| XGL6030-821MED | XGL6030-821MTD | XGL6030-821MSD |
| XGL6030-102MED | XGL6030-102MTD | XGL6030-102MSD |
| XGL6030-122MED | XGL6030-122MTD | XGL6030-122MSD |
| XGL6030-152MED | XGL6030-152MTD | XGL6030-152MSD |
| XGL6030-182MED | XGL6030-182MTD | XGL6030-182MSD |
| XGL6030-222MED | XGL6030-222MTD | XGL6030-222MSD |
| XGL6030-332MED | XGL6030-332MTD | XGL6030-332MSD |
| XGL6030-472MED | XGL6030-472MTD | XGL6030-472MSD |
| XGL6030-562MED | XGL6030-562MTD | XGL6030-562MSD |
| XGL6030-682MED | XGL6030-682MTD | XGL6030-682MSD |
| XGL6030-822MED | XGL6030-822MTD | XGL6030-822MSD |
| XGL6030-103MED | XGL6030-103MTD | XGL6030-103MSD |
| XGL6030-123MED | XGL6030-123MTD | XGL6030-123MSD |
| XGL6030-153MED | XGL6030-153MTD | XGL6030-153MSD |
| XGL6030-183MED | XGL6030-183MTD | XGL6030-183MSD |
Note: All quotations above are taken from the information provided by the supplier in the data sheet they provided.
The TechForum Cross Reference category is for parts that Digi-Key does not sell or parts that have gone obsolete. Our Engineers and Techs have reviewed the specifications for these parts and made a recommendation for a replacement. Please review the suggested part to ensure it will work for your application.