Coilcraft XAL7030 Series Supplier Recommended Alternatives

If you are looking for the Coilcraft XAL7030 Series of high current shielded power inductors the manufacturer recommends the following alternative options.

See XGL6030 to save 25% board area, improved efficiency due to low DCR (up to 40% lower)-Coilcraft

Inductance (µH) XAL7030 Series (Not Available) XGL6030 Series (*Available)
XAL7030/XGL6030 Datasheet Datasheet
0.16µH/0.18µH XAL7030-161ME_ XGL6030-181MEC
0.30µH/0.38µH XAL7030-301ME_ XGL6030-381MEC
0.60µH/0.68µH XAL7030-601ME_ XGL6030-681MEC
1.0µH/1.0µH XAL7030-102ME_ XGL6030-102MEC
1.5µH/1.5µH XAL7030-152ME_ XGL6030-152MEC
2.2µH/2.2µH XAL7030-222ME_ XGL6030-222MEC
2.7µH/µH XAL7030-272ME_ N/A
3.3µH/3.3µH XAL7030-332ME_ XGL6030-332MEC
4.7µH/4.7µH XAL7030-472ME_ XGL6030-472MEC
5.6µH/5.6µH XAL7030-562ME_ XGL6030-562MEC
6.8µH/6.8µH XAL7030-682ME_ XGL6030-682MEC
8.2µH/8.2µH XAL7030-822ME_ XGL6030-822MEC
10µH/10µH XAL7030-103ME_ XGL6030-103MEC

Example Part Number:





Three digit induction code. The first two are significant. The last one is the multiplication factor (the number of zeroes).
8.2µH = 8200nH = 82 significant with two zeroes = 822


. E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).


C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked

Market Place Products

While these products are available through Digi-Key, please note that they are considered Market Place Products and this may impact quantities available, lead times, and other factors.

For More information on Market Place Products Please click here:

Digi-Key Marketplace | Digikey Electronics

Digi-Key Marketplace is your access to millions of new products and services from new suppliers all on one website. Learn more at Digi-Key today!

XAL7030 Series Part Numbers
E = Halogen free component. RoHS compliant tin-silver over copper terminations. T = RoHS tin-silver-copper (95.5/4/0.5). S = non-RoHS tin-lead (63/37).
XAL7030-161MEC XAL7030-161MTC XAL7030-161MSC
XAL7030-301MEC XAL7030-301MTC XAL7030-301MSC
XAL7030-601MEC XAL7030-601MTC XAL7030-601MSC
XAL7030-102MEC XAL7030-102MTC XAL7030-102MSC
XAL7030-152MEC XAL7030-152MTC XAL7030-152MSC
XAL7030-222MEC XAL7030-222MTC XAL7030-222MSC
XAL7030-272MEC XAL7030-272MTC XAL7030-272MSC
XAL7030-332MEC XAL7030-332MTC XAL7030-332MSC
XAL7030-472MEC XAL7030-472MTC XAL7030-472MSC
XAL7030-562MEC XAL7030-562MTC XAL7030-562MSC
XAL7030-682MEC XAL7030-682MTC XAL7030-682MSC
XAL7030-822MEC XAL7030-822MTC XAL7030-822MSC
XAL7030-103MEC XAL7030-103MTC XAL7030-103MSC
XAL7030-161MEB XAL7030-161MTB XAL7030-161MSB
XAL7030-301MEB XAL7030-301MTB XAL7030-301MSB
XAL7030-601MEB XAL7030-601MTB XAL7030-601MSB
XAL7030-102MEB XAL7030-102MTB XAL7030-102MSB
XAL7030-152MEB XAL7030-152MTB XAL7030-152MSB
XAL7030-222MEB XAL7030-222MTB XAL7030-222MSB
XAL7030-272MEB XAL7030-272MTB XAL7030-272MSB
XAL7030-332MEB XAL7030-332MTB XAL7030-332MSB
XAL7030-472MEB XAL7030-472MTB XAL7030-472MSB
XAL7030-562MEB XAL7030-562MTB XAL7030-562MSB
XAL7030-682MEB XAL7030-682MTB XAL7030-682MSB
XAL7030-822MEB XAL7030-822MTB XAL7030-822MSB
XAL7030-103MEB XAL7030-103MTB XAL7030-103MSB
XAL7030-161MED XAL7030-161MTD XAL7030-161MSD
XAL7030-301MED XAL7030-301MTD XAL7030-301MSD
XAL7030-601MED XAL7030-601MTD XAL7030-601MSD
XAL7030-102MED XAL7030-102MTD XAL7030-102MSD
XAL7030-152MED XAL7030-152MTD XAL7030-152MSD
XAL7030-222MED XAL7030-222MTD XAL7030-222MSD
XAL7030-272MED XAL7030-272MTD XAL7030-272MSD
XAL7030-332MED XAL7030-332MTD XAL7030-332MSD
XAL7030-472MED XAL7030-472MTD XAL7030-472MSD
XAL7030-562MED XAL7030-562MTD XAL7030-562MSD
XAL7030-682MED XAL7030-682MTD XAL7030-682MSD
XAL7030-822MED XAL7030-822MTD XAL7030-822MSD
XAL7030-103MED XAL7030-103MTD XAL7030-103MSD
XGL6030 Series Part Numbers
E = Halogen free component. RoHS compliant tin-silver over copper. T = RoHS tin-silver-copper (95.5/4/0.5). S = non-RoHS tin-lead (63/37).
XGL6030-181MEC XGL6030-181MTC XGL6030-181MSC
XGL6030-221MEC XGL6030-221MTC XGL6030-221MSC
XGL6030-381MEC XGL6030-381MTC XGL6030-381MSC
XGL6030-471MEC XGL6030-471MTC XGL6030-471MSC
XGL6030-681MEC XGL6030-681MTC XGL6030-681MSC
XGL6030-821MEC XGL6030-821MTC XGL6030-821MSC
XGL6030-102MEC XGL6030-102MTC XGL6030-102MSC
XGL6030-122MEC XGL6030-122MTC XGL6030-122MSC
XGL6030-152MEC XGL6030-152MTC XGL6030-152MSC
XGL6030-182MEC XGL6030-182MTC XGL6030-182MSC
XGL6030-222MEC XGL6030-222MTC XGL6030-222MSC
XGL6030-332MEC XGL6030-332MTC XGL6030-332MSC
XGL6030-472MEC XGL6030-472MTC XGL6030-472MSC
XGL6030-562MEC XGL6030-562MTC XGL6030-562MSC
XGL6030-682MEC XGL6030-682MTC XGL6030-682MSC
XGL6030-822MEC XGL6030-822MTC XGL6030-822MSC
XGL6030-103MEC XGL6030-103MTC XGL6030-103MSC
XGL6030-123MEC XGL6030-123MTC XGL6030-123MSC
XGL6030-153MEC XGL6030-153MTC XGL6030-153MSC
XGL6030-183MEC XGL6030-183MTC XGL6030-183MSC
XGL6030-181MED XGL6030-181MTD XGL6030-181MSD
XGL6030-221MED XGL6030-221MTD XGL6030-221MSD
XGL6030-381MED XGL6030-381MTD XGL6030-381MSD
XGL6030-471MED XGL6030-471MTD XGL6030-471MSD
XGL6030-681MED XGL6030-681MTD XGL6030-681MSD
XGL6030-821MED XGL6030-821MTD XGL6030-821MSD
XGL6030-102MED XGL6030-102MTD XGL6030-102MSD
XGL6030-122MED XGL6030-122MTD XGL6030-122MSD
XGL6030-152MED XGL6030-152MTD XGL6030-152MSD
XGL6030-182MED XGL6030-182MTD XGL6030-182MSD
XGL6030-222MED XGL6030-222MTD XGL6030-222MSD
XGL6030-332MED XGL6030-332MTD XGL6030-332MSD
XGL6030-472MED XGL6030-472MTD XGL6030-472MSD
XGL6030-562MED XGL6030-562MTD XGL6030-562MSD
XGL6030-682MED XGL6030-682MTD XGL6030-682MSD
XGL6030-822MED XGL6030-822MTD XGL6030-822MSD
XGL6030-103MED XGL6030-103MTD XGL6030-103MSD
XGL6030-123MED XGL6030-123MTD XGL6030-123MSD
XGL6030-153MED XGL6030-153MTD XGL6030-153MSD
XGL6030-183MED XGL6030-183MTD XGL6030-183MSD

Note: All quotations above are taken from the information provided by the supplier in the data sheet they provided.

The TechForum Cross Reference category is for parts that Digi-Key does not sell or parts that have gone obsolete. Our Engineers and Techs have reviewed the specifications for these parts and made a recommendation for a replacement. Please review the suggested part to ensure it will work for your application.