Coilcraft XAL6060 Series Supplier Recommended Alternatives

If you are looking for the Coilcraft XAL6060 Series of high current power inductors the manufacturer recommends the follwing alternative options.

For XAL6060, see XGL6060 for significantly lower DCR (up to 35% lower) and higher L values (up to 47 µH). See XGL5030 to save up to 30% board space and 3 mm in height.-Coilcraft

Inductance (µH) XAL6060 Series (Not Available) XGL6060 Series (*Available)
XAL6060/XGL6060 Datasheet Datasheet
4.7µH/4.7µH XAL6060-472ME_ XGL6060-472MEC
5.6µH/5.6µH XAL6060-562ME_ XGL6060-562MEC
6.8µH/6.8µH XAL6060-682ME_ XGL6060-682MEC
8.2µH/8.2µH XAL6060-822ME_ XGL6060-822MEC
10µH/10µH XAL6060-103ME_ XGL6060-103MEC
15µH/15µH XAL6060-153ME_ XGL6060-153MEC
22µH/22µH XAL6060-223ME_ XGL6060-223MEC
33µH/33µH XAL6060-333ME_ XGL6060-333MEC
Inductance (µH) XAL6060 Series (Not Available) XGL5030 Series (Available)
XAL6060/XGL5030 Datasheet Datasheet
4.7µH/4.7µH XAL6060-472ME_ XGL5030-472MEC
5.6µH/5.6µH XAL6060-562ME_ XGL5030-562MEC
6.8µH/6.8µH XAL6060-682ME_ XGL5030-682MEC
8.2µH/8.2µH XAL6060-822ME_ XGL5030-822MEC
10µH/10µH XAL6060-103ME_ XGL5030-103MEC
15µH/15µH XAL6060-153ME_ XGL5030-153MEC
22µH/22µH XAL6060-223ME_ XGL5030-223MEC
33µH/- XAL6060-333ME_ N/A

Example Part Number:





Three digit induction code. The first two are significant. The last one is the multiplication factor (the number of zeroes).
22µH = 22000nH = 22 significant with three zeroes = 223


. E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).


C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel
available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked

Market Place Products

While these products are available through Digi-Key, please note that they are considered Market Place Products and this may impact quantities available, lead times, and other factors.

For More information on Market Place Products Please click here:

Digi-Key Marketplace | Digikey Electronics

Digi-Key Marketplace is your access to millions of new products and services from new suppliers all on one website. Learn more at Digi-Key today!

XAL6060 Series Part Number
E = Halogen free component. RoHS compliant tin-silver over copper terminations. T = RoHS tin-silver-copper (95.5/4/0.5). S = non-RoHS tin-lead (63/37).
XAL6060-472MEC XAL6060-472MTC XAL6060-472MSC
XAL6060-562MEC XAL6060-562MTC XAL6060-562MSC
XAL6060-682MEC XAL6060-682MTC XAL6060-682MSC
XAL6060-822MEC XAL6060-822MTC XAL6060-822MSC
XAL6060-103MEC XAL6060-103MTC XAL6060-103MSC
XAL6060-153MEC XAL6060-153MTC XAL6060-153MSC
XAL6060-223MEC XAL6060-223MTC XAL6060-223MSC
XAL6060-333MEC XAL6060-333MTC XAL6060-333MSC
XAL6060-472MEB XAL6060-472MTB XAL6060-472MSB
XAL6060-562MEB XAL6060-562MTB XAL6060-562MSB
XAL6060-682MEB XAL6060-682MTB XAL6060-682MSB
XAL6060-822MEB XAL6060-822MTB XAL6060-822MSB
XAL6060-103MEB XAL6060-103MTB XAL6060-103MSB
XAL6060-153MEB XAL6060-153MTB XAL6060-153MSB
XAL6060-223MEB XAL6060-223MTB XAL6060-223MSB
XAL6060-333MEB XAL6060-333MTB XAL6060-333MSB
XAL6060-472MED XAL6060-472MTD XAL6060-472MSD
XAL6060-562MED XAL6060-562MTD XAL6060-562MSD
XAL6060-682MED XAL6060-682MTD XAL6060-682MSD
XAL6060-822MED XAL6060-822MTD XAL6060-822MSD
XAL6060-103MED XAL6060-103MTD XAL6060-103MSD
XAL6060-153MED XAL6060-153MTD XAL6060-153MSD
XAL6060-223MED XAL6060-223MTD XAL6060-223MSD
XAL6060-333MED XAL6060-333MTD XAL6060-333MSD
XGL6060 Series Part Numbers
E = Halogen free component. RoHS compliant tin-silver over copper terminations. T = RoHS tin-silver-copper (95.5/4/0.5). S = non-RoHS tin-lead (63/37).
XGL6060-221MEC XGL6060-221MTC XGL6060-221MSC
XGL6060-471MEC XGL6060-471MTC XGL6060-471MSC
XGL6060-681MEC XGL6060-681MTC XGL6060-681MSC
XGL6060-102MEC XGL6060-102MTC XGL6060-102MSC
XGL6060-122MEC XGL6060-122MTC XGL6060-122MSC
XGL6060-152MEC XGL6060-152MTC XGL6060-152MSC
XGL6060-182MEC XGL6060-182MTC XGL6060-182MSC
XGL6060-222MEC XGL6060-222MTC XGL6060-222MSC
XGL6060-332MEC XGL6060-332MTC XGL6060-332MSC
XGL6060-472MEC XGL6060-472MTC XGL6060-472MSC
XGL6060-562MEC XGL6060-562MTC XGL6060-562MSC
XGL6060-682MEC XGL6060-682MTC XGL6060-682MSC
XGL6060-822MEC XGL6060-822MTC XGL6060-822MSC
XGL6060-103MEC XGL6060-103MTC XGL6060-103MSC
XGL6060-123MEC XGL6060-123MTC XGL6060-123MSC
XGL6060-153MEC XGL6060-153MTC XGL6060-153MSC
XGL6060-183MEC XGL6060-183MTC XGL6060-183MSC
XGL6060-223MEC XGL6060-223MTC XGL6060-223MSC
XGL6060-333MEC XGL6060-333MTC XGL6060-333MSC
XGL6060-473MEC XGL6060-473MTC XGL6060-473MSC
XGL6060-221MED XGL6060-221MTD XGL6060-221MSD
XGL6060-471MED XGL6060-471MTD XGL6060-471MSD
XGL6060-681MED XGL6060-681MTD XGL6060-681MSD
XGL6060-102MED XGL6060-102MTD XGL6060-102MSD
XGL6060-122MED XGL6060-122MTD XGL6060-122MSD
XGL6060-152MED XGL6060-152MTD XGL6060-152MSD
XGL6060-182MED XGL6060-182MTD XGL6060-182MSD
XGL6060-222MED XGL6060-222MTD XGL6060-222MSD
XGL6060-332MED XGL6060-332MTD XGL6060-332MSD
XGL6060-472MED XGL6060-472MTD XGL6060-472MSD
XGL6060-562MED XGL6060-562MTD XGL6060-562MSD
XGL6060-682MED XGL6060-682MTD XGL6060-682MSD
XGL6060-822MED XGL6060-822MTD XGL6060-822MSD
XGL6060-103MED XGL6060-103MTD XGL6060-103MSD
XGL6060-123MED XGL6060-123MTD XGL6060-123MSD
XGL6060-153MED XGL6060-153MTD XGL6060-153MSD
XGL6060-183MED XGL6060-183MTD XGL6060-183MSD
XGL6060-223MED XGL6060-223MTD XGL6060-223MSD
XGL6060-333MED XGL6060-333MTD XGL6060-333MSD
XGL6060-473MED XGL6060-473MTD XGL6060-473MSD
XGL5030 Series Part Numbers
E = Halogen free component. RoHS compliant tin-silver over copper terminations. T = RoHS tin-silver-copper (95.5/4/0.5). S = non-RoHS tin-lead (63/37).
XGL5030-181MEC XGL5030-181MTC XGL5030-181MSC
XGL5030-351MEC XGL5030-351MTC XGL5030-351MSC
XGL5030-401MEC XGL5030-401MTC XGL5030-401MSC
XGL5030-521MEC XGL5030-521MTC XGL5030-521MSC
XGL5030-601MEC XGL5030-601MTC XGL5030-601MSC
XGL5030-651MEC XGL5030-651MTC XGL5030-651MSC
XGL5030-821MEC XGL5030-821MTC XGL5030-821MSC
XGL5030-901MEC XGL5030-901MTC XGL5030-901MSC
XGL5030-102MEC XGL5030-102MTC XGL5030-102MSC
XGL5030-122MEC XGL5030-122MTC XGL5030-122MSC
XGL5030-152MEC XGL5030-152MTC XGL5030-152MSC
XGL5030-182MEC XGL5030-182MTC XGL5030-182MSC
XGL5030-222MEC XGL5030-222MTC XGL5030-222MSC
XGL5030-332MEC XGL5030-332MTC XGL5030-332MSC
XGL5030-472MEC XGL5030-472MTC XGL5030-472MSC
XGL5030-562MEC XGL5030-562MTC XGL5030-562MSC
XGL5030-682MEC XGL5030-682MTC XGL5030-682MSC
XGL5030-822MEC XGL5030-822MTC XGL5030-822MSC
XGL5030-103MEC XGL5030-103MTC XGL5030-103MSC
XGL5030-123MEC XGL5030-123MTC XGL5030-123MSC
XGL5030-153MEC XGL5030-153MTC XGL5030-153MSC
XGL5030-183MEC XGL5030-183MTC XGL5030-183MSC
XGL5030-223MEC XGL5030-223MTC XGL5030-223MSC
XGL5030-181MED XGL5030-181MTD XGL5030-181MSD
XGL5030-351MED XGL5030-351MTD XGL5030-351MSD
XGL5030-401MED XGL5030-401MTD XGL5030-401MSD
XGL5030-521MED XGL5030-521MTD XGL5030-521MSD
XGL5030-601MED XGL5030-601MTD XGL5030-601MSD
XGL5030-651MED XGL5030-651MTD XGL5030-651MSD
XGL5030-821MED XGL5030-821MTD XGL5030-821MSD
XGL5030-901MED XGL5030-901MTD XGL5030-901MSD
XGL5030-102MED XGL5030-102MTD XGL5030-102MSD
XGL5030-122MED XGL5030-122MTD XGL5030-122MSD
XGL5030-152MED XGL5030-152MTD XGL5030-152MSD
XGL5030-182MED XGL5030-182MTD XGL5030-182MSD
XGL5030-222MED XGL5030-222MTD XGL5030-222MSD
XGL5030-332MED XGL5030-332MTD XGL5030-332MSD
XGL5030-472MED XGL5030-472MTD XGL5030-472MSD
XGL5030-562MED XGL5030-562MTD XGL5030-562MSD
XGL5030-682MED XGL5030-682MTD XGL5030-682MSD
XGL5030-822MED XGL5030-822MTD XGL5030-822MSD
XGL5030-103MED XGL5030-103MTD XGL5030-103MSD
XGL5030-123MED XGL5030-123MTD XGL5030-123MSD
XGL5030-153MED XGL5030-153MTD XGL5030-153MSD
XGL5030-183MED XGL5030-183MTD XGL5030-183MSD
XGL5030-223MED XGL5030-223MTD XGL5030-223MSD

Note: All quotations above are taken from the information provided by the supplier in the data sheet they provided.

The TechForum Cross Reference category is for parts that Digi-Key does not sell or parts that have gone obsolete. Our Engineers and Techs have reviewed the specifications for these parts and made a recommendation for a replacement. Please review the suggested part to ensure it will work for your application.