Coilcraft XEL6060 Series Supplier Recommended Alternatives

If you are looking for the Coilcraft XGL6060 series of high current shielded power inductors the manufacturer recommends the following alternative options.

See XGL6060 for significantly lower DCR (up to 40% lower) and higher L values (up to 47 µH)-Coilcraft

Inductance (µH) XEL6060 Series (Not Available) XGL6060 Series (*Available)
XEL6060/XGL6060 Datasheet Datasheet
0.33µH/0.22µH XEL6060-331ME_ XGL6060-221MEC
0.56µH/0.47µH XEL6060-561ME_ XGL6060-471MEC
0.82µH/0.68µH XEL6060-821ME_ XGL6060-681MEC
1.0µH/1.0µH XEL6060-102ME_ XGL6060-102MEC
1.5µH/1.5µH XEL6060-152ME_ XGL6060-152MEC
2.2µH/2.2µH XEL6060-222ME_ XGL6060-222MEC
2.7µH/3.3µH XEL6060-272ME_ XGL6060-332MEC
4.7µH/4.7µH XEL6060-472ME_ XGL6060-472MEC
6.8µH/6.8µH XEL6060-682ME_ XGL6060-682MEC
8.2µH/8.2µH XEL6060-822ME_ XGL6060-822MEC
12µH/12µH XEL6060-123ME_ XGL6060-123MEC

Example Part Number





Three digit induction code. The first two are significant. The last one is the multiplication factor (the number of zeroes).
12µH = 12000nH = 12 significant with three zeroes = 123


E = RoHS compliant tin-silver over copper.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37).


C = 7″ machine-ready reel. EIA-481 embossed plastic tape. Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge).
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked

Market Place Products

While these products are available through Digi-Key, please note that they are considered Market Place Products and this may impact quantities available, lead times, and other factors.

For More information on Market Place Products Please click here:

Digi-Key Marketplace | Digikey Electronics

Digi-Key Marketplace is your access to millions of new products and services from new suppliers all on one website. Learn more at Digi-Key today!

Note: All quotations above are taken from the information provided by the supplier in the data sheet they provided.

The TechForum Cross Reference category is for parts that Digi-Key does not sell or parts that have gone obsolete. Our Engineers and Techs have reviewed the specifications for these parts and made a recommendation for a replacement. Please review the suggested part to ensure it will work for your application.