Help Identifying Resistors

Passives Resistors
, ,
1

Hey all. Thanks in advance for any help you can give me identifying these resistors. I’m a newbie so please forgive me if this is rudimentary. I did spend time searching here as well as the Vishay site and DataSheets360, etc., but had no luck at all. In case photos aren’t clear, lettering/numbering follows (“@” means mark is unclear). Any help greatly appreciated. Even if you just point me in the right direction for further research.

(1) K477@4-7WL (also handwritten “0.6 ohm”)
(2) B0.25WL
(3) B0.23WL
(4) B0.5
(5) RW33V / R10WL

IMG_5505
IMG_55052448×2448 985 KB
IMG_5500
IMG_55002448×3264 1.35 MB
IMG_5497
IMG_54972448×3264 2.17 MB

2

Hello JRTPhilly, and welcome to the TechForum.

You appear to have a set of Wirewound resistors. On your third picture, the middle two resistors seem to have exposed wire, which will let the clamp short the resistor (as a potentiometer). Similar parts can be reviewed at our chassis mount resistor section and adjustable power resistor.

I was unable to verify the part markings you have, note that some manufacturers print date code information there so it may change per batch.