We have four of these boards but no instructions for configuring them for use with T Type thermocouples. Need help.
Welcome to the DigiKey TechForum fordj.
I searched on the manufacture’s website, and found this page with all the documents and downloads.
Click Here for that page.
Hope this information helps.
Thanks David but I don’t see anything here for configuring for a T Type TC- only J and K.
Per the attached document, the device in question offers a software configuration option which supports a much broader feature set than the DIP switch configuration mode. Phoenix P/N 2811271 is the suggested programming adapter, and related software should be located under the “software” drop down on the page linked above by David.
db_en_mini_mcr_tc_ui_nc_105447_en_02.pdf (318.7 KB)
Thanks Rick!