One questions that comes through our department is from customers who are trying to identify a surface mount Aluminum Electrolytic Cap and there is no Voltage listed. Once we start looking at the cap we often find that the voltage is listed, however as a letter and not the actual voltage value. Her…

creo que ya complete mi pedido, pero no me sale confirmacion, ya se completo el pedido?

Thanks for the reply. I replaced with a EEE-1HA010NR from here like in your link a while back after posting here and it seems to be working fine. There is a (N) mark on the PCB indicating bi-polar but I didn’t see it at first.

[image] Adrian: creo que ya complete mi pedido, pero no me sale confirmacion, ya se completo el pedido? @Adrian You will need to call in and speak to our sales team for that information. 1-800-344-4539

buen dia, yo de nuevo, podría ayudarme a encontrar un reemplazo para ese capacitor marcado en rojo: 2E4/VLPS/220/6.3V y una pregunta mas. que significa el código de colores que tiene cada capacitor en la parte superior? hay uno negro, uno rosa y otros rojos. ojala pueda responderme la pregunta… m…

@Adrian The below link shows the options found based on the given information. https://www.digikey.com/short/z3zh49 The color does not callout any specification. As far as I can tell it is mostly manufacturer choice what color they use.

Hello @jin11mei Unfortunately I was not able to identify the exact capacitor in your picture to be able to verify the specifications. Based off the part marking it would appear to be a 22uF 35V, however without a data sheet I would not be able to verify this. -Robert

Hello - could you help me identify this SMD capacitor [SMD Capacitor identify] As you can see the markings are:- OR 47 VZA - the “V” is slightly bigger than the “ZA” It is 6mm tall by 6mm across. So it seems that is a 47uF 35Volt Capacitor - please correct me if I am wrong! However, does any…

Hello @Richard I think what you have is a 47uF 35V cap. The OR being a lot code and the ZA being a series number. The order is different, however I think the ZA series from Panasonic matches what you are seeing. EEH-ZA1V470P would be an example part number [image] -Robert

[image] sveng: Hi I’m trying to identify the following cap, think its a 33uf 100v but would like to identify manufacturer so that I can find an equivalent. aka is it a low ESR etc. [image] Tx, sveng Hello - I know I am replying to an old post - but that logo looks like a Samyoung brand o…

SMT Electrolytic Capacitor with no Voltage Rating

Passives Capacitors

jin11mei February 22, 2020, 4:20am 87

I need to replace two SMD Aluminum Electrolytic Capacitors in the controller board for Thermador oven, please see the attached photo. can you tell me the code meaning or value/voltage/temperature? Thanks.

wenyan

Topic		Replies	Views
Surface Mount Capacitors and their Markings Capacitors part-marking , part-identification	7	24710	April 2, 2024
Ceramic / Film Axial Capacitor Marking & Replacement Capacitors cross-reference , kemet , part-identification , ceramic-capacitors	4	278	August 29, 2024
Help with Motherboard Capacitor (Asus P5Q3 Deluxe) Capacitors cross-reference , part-identification , aluminum-electrolytic-capacitors , aluminum-polymer-capacitors	14	1156	February 9, 2024
Valor of this cap Capacitors cross-reference , part-identification , aluminum-electrolytic-capacitors	8	1580	January 28, 2021
Smd cap identification Capacitors cross-reference , aluminum-electrolytic-capacitors	1	433	January 19, 2024

SMT Electrolytic Capacitor with no Voltage Rating

Related topics