I’ve power board 220v looking for 9 and 3 pin female going on the board and male going on cable
Hello tekowndo000, welcome to the Tech Forum. It looks like your connectors could be Amp mate-n-lok. We need the pitch of your connectors in order to find the correct options for you. Can you share the pitch (center of one contact to the center of the next). If there is any lettering or numbering on your connectors, please share that, as well.
hi
the pitch 0.20~0.22 and no numbers or letters on them
These are the Amp options we have for the board mount receptacles. These have a .24" and .25" pitch. You’ll have to take a look at the datasheets to match dimensions. When you have chosen your female connectors, the mating connectors and the contacts are listed at the bottom of each part’s Product Detail Page. When you choose the mates from the bottom of the page and click on the link, the contacts will be listed at the bottom of the male connector’s Product Detail Page, under the heading “Associated Products”.
1 Like